Ness Alarms Maintenance Melbourne Services

Call Ness Service: Mob: 0408359072


D8 D8X D16X D24 ECO Navigator R8 R16 NESS Pro L NESS Pro LD NESS Pro LX LXE NESS 5000 – PH: 1300 137 120

We service Ness keypad memory light flashing – Ness Keypad battery light flashing – Alarm keypad beeping – Ness alarm system reset – Alarm battery replacements – Ness alarm keypad replacements – Smoke alarms beeping – False alarms repaired

Our Alarm Maintenance can connect keyring remote controls to current old and existing Ness alarms

Does your existing Ness alarm system have keyring remote controls? We can connect them to any alarm system!

Ness alarm system reset should be done by a qualified technician. In most cases, the installer code is not known and makes this process difficult to do yourself. A full factory default is then required. If your alarm system is beeping, this is a signal that your alarm system needs to be serviced.

Is your alarm system false alarming?

There is nothing more annoying than an Alarm system with false alarms and a beeping keypad. Waking up in the early hours by the alarm sirens for no apparent reason is very troublesome.

Environmental and various system faults may cause a beeping keypad and trouble light to occur. Our experienced service technicians can analyze and repair the fault of your alarm system.

Our alarm service technicians can repair many different makes and models.

Ness Alarm Systems has everything you need in a security alarm for Home and Business security. Providing high security features and simplicity at the best price!

Ness alarm systems is one of the most commonly used security systems in Australia and very versatile including:

  • Ness DX8, Ness DX16 – 8 to 16 alarm zones
  • fully flexible zones for multi areas
  • Arm Disarm operation with key ring remote control
  • monitoring to mobile phone or back to base control room
  • home mode arming for protection day – night – asleep
  • programmable auxiliary outputs for outdoor lighting, heaters, coolers, garage door and much more
  • programmable day zones including temporary day zones with chime, double trigger zones and adjustable vibration sensitivity for each zone

How to arm the Ness alarm system

  • Press the [ARM] button on the Ness keypad to arm – Then Press [E or ENTER] button. Two beeps means correct number.
  • The ARMED LED/LCD indicator on the Ness keypad will now illuminate and, the exit delay will start and your Ness alarm will be ON.

Disarming the alarm system

  • Enter your user code eg. 1 2 3 4 . Then Press the [E or ENTER] button.
  • The keypad will beep two times to indicate correct code. The Ness alarm is now disarmed.
  • The ARMED LED/LCD keypad indicator will turn OFF.
  • One long beep means an incorrect number entered.

Bypassing or Excluding and turning OFF rooms/zones on Arming

The Ness alarm system lets you to program the alarm system to turn OFF zones that your prefer.
Press the [EXCLUDE] button.
Enter your user code.
Press the [E or ENTER] button.
The exclude LED/LCD segment will turn on.
Select the zones that you wish to bypass, then press [E or ENTER].
Continue adding each zone to Bypass by repeating previous step .
Press the [E or ENTER] button to exit Exclude mode.
The exclude LED/LCD indicator on the Ness keypad will flash and the selected zone will be bypassed next time the system is armed.

Home Mode. (Stay/Monitor/Home) Arming the Ness alarm system

This function lets you to be in the protected area while partially arming the Ness alarm system.
For example, when you go to sleep at night, doors and windows can be armed without arming the other rooms.
Press the [HOME or MONITOR] button. Then Press the [E or ENTER] button.
The ARMED LED/LCD indicator on the Ness keypad will now flash continuously.
This indicates that the system is in Home armed mode.

To disarm – Enter 4 digit user code then [E or Enter] e.g 1 2 3 4 E

Viewing the Ness Alarm History (Previous Alarms)

If your alarm system has been triggered ,the [MEMORY] button will illuminate.
To display the zones which have have been activated
Press the [MEM or MEMORY] button. Then press [E or ENTER] . The MEMORY LED/LCD indicator on keypad will turn on or flashing.
Press the [MEM or MEMORY] button again.
The most recent event will be displayed on the keypad. Press the [MEMORY] button to view the next event. Keep pressing the [MEM or MEMORY] to view previous history events.
Press the [E or ENTER] button twice to exit program memory mode. The memory light will now turn off.

Changing Ness User Codes

To change Ness user codes, you will first require the Master code.
Press [P or PROGRAM] . Then enter the Master code. Then [E or ENTER] button. e.g. P 123 E.
Press [P or PROGRAM] again. Then enter the User program number. Then [E or ENTER]
Enter your new 4 digit code. Then [E or ENTER]
The keypad will beep once.
Enter the new 4 digit code again. Then press the [E or ENTER].
The keypad will beep 3 times to confirm the new code
To exit this mode, press [P or PROGRAM] and then [E or ENTER] button. Your code has now changed and previous number erased.

e.g. (If the user code is 1234 , Master code program number is 201 and the new 4 digit master code is 2016) P1234E P201E 2016 E 2016 E P E (P= program E= enter)

Ness alarm systems is simple to operate — Ness Navigator keypad Video